Montigo RX88 - Manual (Page 9)


DFc control BoArD
Fig. 4A: Proflame DFC Board.
The Proflame Digital Fireplace Control (DFC) board is a device that allows the automatic ignition
and pilot flame supervision, to command the functions of a hearth appliance, see fig.4A.
It’s configured to control the ON/OFF main burner operation, giving the choice of both IPI
(intermittent pilot ignition), and CPI (continuous pilot ignition) modes.
The Proflame DFC board controls and connects directly to the pilot assembly and an automatic
valve of the Proflame 880, 886 and 885 families using low electric power.
The DFC Board can be powered by an AC/DC wall adaptor and battery pack for back up (Stand
Alone System). When used with the Proflame Remote System, with or without a split flow valve,
the DFC Board can be powered by an AC/DC wall adaptor via specific wire harness using the
receiver batteries for back up (GTM System). Additionally, the DFC Board can be powered by the
Fan Control Module (FCM) via specific wire harness using the receiver batteries for back up (GTMF
System).
IONIZATION
DIAgNOSTIC
SPARK
gROUND MAIN wIRINg
vALvE,
COMMAND,
POwER
0_I00_gtmf_cat_only 0-  1/0/00 1.1.0