Installation – Montigo HFK50 User Manual
Page 2
Advertising
Installation
Page 2
XT0014 - 092214
3. Install the right fan as shown in Figure 6 to the bracket underneath
the firebox using the screws supplied (motor should be oriented
towards the back side of the fireplace).
Figure 5
Install right fan to bracket
4. Attach the DRB001 using the supplied Velcro strips to the floor of
the fireplace. Note: ensure that control box clears the door buckle.
5. Plug DRB001 Power Cord to the PPO box.
Figure 6
Attach the DRB001
Figure 7 Plug in power cord to PPO
Figure 4
Install left fan to bracket
Door
buckle
PPO
Box
2. Install the left fan as shown in Figure 4 to the bracket underneath
the firebox using the screws supplied (motor should be oriented
towards the back side of the fireplace).
Advertising