MovinCool CM12 Service Manual - Manual (Page 28)

Operation Section
28
5.6 Fan Motor
(1) Evaporator Fan Motor
• The evaporator fan motor is a single phase,
induction type two-speed motor.
Specifications:
- Rated Voltage: 115 V, 60 Hz
- Rated Output: High - 44.5 W, Low - 14.3 W
- Rotational Speed: High - 1100 rpm, Low - 760
rpm
< NOTE >
An internal overload relay is used to protect the fan motor. This relay is built into the fan motor and
interrupts the flow of current when there is an over current situation, or if there is an abnormally
high temperature buildup in the fan motor.
(2) Condenser Fan Motor
• The condenser fan motor is a single phase,
induction type two-speed motor.
Specifications:
- Rated Voltage: 115 V, 60 Hz
- Rated Output: High - 91.2 W, Low - 68.7 W
- Rotational Speed: High - 1100 rpm, Low - 975
rpm
< NOTE >
An internal overload relay is used to protect the fan motor. This relay is built into the fan motor and
interrupts the flow of current when there is an over current situation, or if there is an abnormally
high temperature buildup in the fan motor.
I000520
ILL00594-00