Mr. Coffee BVMC-SJX33GT - Manual (Page 9)

5. Make sure the decanter is empty before starting to
brew coffee.
6. Be sure to turn your coffeemaker off when no
longer using it.
The Fresh brew™ Timer Feature
The Fresh Brew™ Timer feature lets you
know how long your coffee has been
waiting for you. At the start of the brew
cycle, the Fresh Brew™ Timer feature will
automatically be activated.
Press the Fresh Brew™ Timer button
once (Figure 9) and the clock time will change to show
the amount of time that has passed since brewing
completed. Push again to display current time.
NOTE: The BREW NOW green light must be on for the
Fresh Brew™ Timer feature to operate. The time and
delay brew time cannot be set when the fresh brew
time is displayed.
bREWING COFFEE LATER
1. You must first set the time for when you would
like the coffeemaker to begin brewing your coffee
as described in “Setting the Clock and the Delay
brew Timer” section.
2. Prepare your coffeemaker as described in “Adding
Water and Ground Coffee” section.
NOTE FOR ThERMAL USERS: Simply remove the
glass decanter from the warming plate and place
the thermal decanter in its place. The blue indicator
light will switch from glass to thermal (Figure 6).
After you have started brewing you can NOT switch
from glass to thermal mode or vice versa, until brewing
cycle has been completed or been cancelled.
NOTE FOR ThERMAL USERS: If you
are choosing to use your coffeemaker
as a thermal and have purchased a
Mr. Coffee ® decanter DRD95, simply
remove the glass decanter from the
warming plate and place the thermal
decanter in its place. The blue indicator
light will switch from glass to thermal
(Figure 6). After you have started
brewing you can NOT switch from glass
to thermal mode or vice versa, until
brewing cycle has been completed or
been cancelled.
2. To enjoy a more full flavored cup of
coffee, press the BREW STRENGTH
button once. The STRONG Brew
Strength amber light will turn on. The
coffeemaker will remain in the Brew
Strength you have selected until you
change it back to REGULAR strength by
pressing the BREW STRENGTH button or
until you unplug the machine (Figure 8).
3. After the used coffee grounds have
cooled, carefully remove the filter basket and
discard them.
NOTE: The shower head cover is hot after brewing.
Always allow the coffeemaker to cool down before
cleaning.
4. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the Fresh Brew™
Timer feature. To turn the coffeemaker off, press the
SELECT/OFF button all lights will turn off.
16 17
Figure 9
Figure 7
Figure 6
Figure 8
BVMC-SJXGT_12ESM2.indd 18 9/11/12 10:53 AM