Mr. Coffee SCTX Series User Manual

Page 7

Advertising
background image

and accurate filling, the water markings on the

removable water reservoir shows the amount of

water needed to make the corresponding desired

number of cups. Do not fill past the “10 cup MAX

line” or water will flow out of the coffeemaker.

NOTE: The amount of coffee brewed will

always be slightly less than the amount of water

poured in the water reservoir. This is due to

the minimum absorption of water by the coffee

grounds.

BREWING COFFEE NOW
1. After completing the steps in the

Adding Water and Coffee section

and with the carafe and the filter

basket securely in place, turn the

coffeemaker on by pressing the BREW NOW button

once (Figure 7). The BREW NOW light will turn on

and pulse to signal that the coffeemaker is on and

brewing.

2. After the used coffee grounds have cooled,

carefully remove the filter basket and discard them.

NOTE: The brew basket drawer is hot after brewing. Always

allow the coffeemaker to cool down before cleaning.

3. Prior to making a second pot of coffee, turn the

coffeemaker off. This will reset the FRESH BREW™

TIMER feature. To turn the coffeemaker off, press the

BREW NOW/OFF button until all lights turn off.

4. Make sure the carafe is empty before starting to

brew coffee.

5. Be sure to turn your coffeemaker off when no

longer using it.

12

13

Figure 5

3. Follow Adding Water and Coffee instructions.

4. When you are done brewing your coffee, rinse the

water filter with fresh water. Do not put your water

filter in the dishwasher.

To replace the water filter disks, twist the

gray disk cover from your water filtration

system. Remove the used disk. Insert the

new disk into the frame and twist the

cover back into place.

C. Adding Water and Ground Coffee

1. Open the brew basket drawer

(Figure 4).

2. Place a MR. COFFEE

®

brand 10–12

cup paper basket-style filter or a

MR. COFFEE

®

permanent filter into

the removable filter basket.

NOTE: If using paper filters, it is

important that the sides of the filter

fit flush against the side of the filter

basket. If filter collapse occurs,

dampen the filter before placing in

the filter basket and adding ground

coffee and water.

3. Add the desired amount of coffee

and gently shake to level the

coffee. See the Suggested Coffee

Measurement Chart (Figure 5).

4. Slide the brew basket back into place

(Figure 6).

5. Fill the removable water reservoir

with cold, fresh water to the

desired capacity (1 cup equals 5 ounces) For easy

Figure 4

Figure 7

Figure 6

Advertising