Specifications – MultiDyne DVI-6000 Series User Manual
Page 26
Instruction Manual, DVI-6000 FTX/FRX
26
SPECIFICATIONS
General:
Video Scan Rates:
As per VESA standards.
Video Standards supported:
DVI and RGB including VGA, SVGA, XGA, WXGA,
SXGA, WSXGA, UXGA, WUXGA, HDMI 480P, 720P,
1080I or 1080P (not HDCP encrypted). See Appendix
Video Resolutions Supported:
Up to 2560x1600 (dual link model) or 1920x1200
(single link model)
Data Formats suported
Bidirectional or unidirectional RS 232, 42x, 485 up to
TBD kbaud.(Optional)
Audio Signal to Noise Ratio:
TBD db
Fibers:
1 fiber standard, 8.3/125um Singlemode (-50/52) or
62.5/125um or 50/125um Multimode (-2), 1 or 2 fibers
with BDD
Fiber Connector Type:
ST, FC, SC or LC
Wavelengths:
1310 SM or 850 MM standard; 1310/1550 SM or
850/1310 MM with BDD; CWDM wavelengths available.
Optical Budget:
8 dB (-50 SM), 13 dB (-52 SM), 6 dB (-2 MM),
Maximum Transmission Distance:
4KM (-50 SM), 10KM (-52 SM), up to 89m at 3G and
70m at 3.75G over 62.5/125um; up to 290m at 3G and
150m at 3.75G over 50/125um (-2 MM),
Operating Environment:
0 – 70 degrees C
Transmitter, DVI-6000-FTX-50/52:
Video Input/Output Connectors:
1 DVI-I plus 1 DVI-I loop thru for local monitor.
Video Input Impedance:
DVI: 100 ohms balanced; RGB: 75 ohms
Video Input Level:
DVI:800mv p-p TMDS; RGB: 700mv p-p
Audio Input Connectors :
3.5mm Stereo unbalanced, 9 pin DIN stereo balanced
Audio Input Level:
unbalanced, < +4dB, balanced, < +16dB
Audio Input Impedance:
>10k unbalanced, 600 ohms balanced
Optical Output Power:
-10 dBm (-50), –5 dBm (-52), –9 dBm (-2)
Power Requirement:
9~24VDC @ TBD A
Receiver, DVI-6000-FRX-50/52:
Optical Input Sensitivity:
–18 dBm (-50/52), –15 dBm (-2).
Video Output Connectors:
2 DVI-I.
Video Output Impedance:
DVI:100 ohms balanced; RGB: 75 ohms
Video Output Level:
DVI: 800mv p-p TMDS; RGB: 700mv p-p into 75R
Audio Output Connectors:
3.5mm Stereo unbalanced, 9 pin DIN stereo balanced
Audio Output Level:
Unity Gain with respect to ‘FTX
Audio Output Impedance:
< 100 Ohms unbalanced, 600 ohms balanced
Power Requirement:
9~24 VDC @ TBD A
.
Specifications subject to change without notice.