MultiDyne HD3000 Gen2 Series - Manual (Page 9)

Instruction Manual, HD3000 Series 6
REV C, Feb 24, 2015
APPENDIX B. Technical Specifications
Video
Bit Rates:
125 to 2970 MBPS
# of Ins/outs: 1 or 2 BNC(model dependent)
Impedance 75 Ohms
Level 800mV (peak to peak)
Standard: SMPTE 425M, 297M, 292M, 259M-C & DVB-ASI
Bit Error Rate (@-22dBm) 10 -11
Return Loss: >15 dB at 5 MHz - 1.485 GHz, >10 dB at 1.5 GHz to 3 GHz
Jitter(wideband) < 0.3 UI
Rise/Fall times <120psecs
Optical
Wavelengths
TX: 1310nm or CWDM RX: 1100~1600nm
Optical Connector ST, SC or LC
Optical Source FP laser or CWDM DFB
Optical Detector PIN Diode
TX Output -7 Standard (0 DFB)
RX Sensitivity -22 dBm
Link Margin 15 to 22 dB (up to 40km)
Fiber Type Multimode or Singlemode, Singlemode recommended
Environmental/ Electrical
Power:
9-24 VDC
Consumption <5 Watts
Temperature: 0 to +70C
Humidity 0-95% RH non-condensing
Dimensions 2.75 x 1.125 x 5 inches
Weight 7 oz.
Display: LEDs for Power, Rate, Carrier Detect, Optical Signal Level
Cable Length Equalized (w/Belden 1694A)
3 GBPS:
>120m
1.485 GBPS: >150m
143-360 MBPS: >350m
Specifications are subject to change without notice.