NavCom SR-7120 Rev.A - Manual (Page 91)

Safari Network User Guide
5-3
To display network services:
1. At the Network Management menu, select:
1) Service Configuration.
2. At the Service Configuration menu, select:
3) List Services
to see all network services with forward and return
bandwidth and available forward and return
bandwidth.
Adding services is discussed in Chapter 4. Deleting
services is discussed later in this chapter.
To display RUs:
1. At the Network Management menu, select:
4) Remote Configuration
2. At the Remote Configuration menu, select:
3) List Remotes
to see configuration for all RUs. The configuration
information for each RU includes: unit logical ID, unit
physical ID, RF output power level, DHCP status and
three communication port configuration.
3. Or at the Remote Configuration menu, select:
4) Show a Remote
then enter the unit’s ID at the prompt to see the
configuration information for the RU.
Adding RUs is discussed in Chapter 4. Reconfiguring
RUs and ports is discussed later in this chapter.
To display SCUs:
1. At the Network Management Menu, select:
3) SCU Configuration
2. At the SCU Configuration menu, select:
3) List SCU’s
to view the configuration information for SCUs.