Nevion DA-AA - Manual (Page 10)

DA-AA Rev. 6
nevion.com | 10
5 Connector module
Figure 8 - Overview of the ADC-AES-C1 connector module
The DA-AA has a dedicated connector module: ADC-AES-C1. This module is mounted at the
rear of the sub-rack. The module is shown in figure 6. J4 is the input DSUB connector, while
J6 is the output connector. Both connectors are FEMALE.
Table 1 – J4
Function Pin
Analogue Audio ANA1 positive input (ANA1+) 7
Analogue Audio ANA1 negative input (ANA1-) 15
Analogue Audio ANA2 positive input (ANA2+) 10
Analogue Audio ANA2 negative input (ANA2-) 3
Ground 2, 5, 8, 11
Table 2 - J6
Function Pin
Analogue Audio ANA1 positive output 1 24
Analogue Audio ANA1 negative output 1 12
Analogue Audio ANA1 positive output 2 10
Analogue Audio ANA1 negative output 2 23
Analogue Audio ANA1 positive output 3 21
Analogue Audio ANA1 negative output 3 9
Analogue Audio ANA1 positive output 4 7
Analogue Audio ANA1 negative output 4 20
Analogue Audio ANA2 positive output 1 18
Analogue Audio ANA2 negative output 1 6
Analogue Audio ANA2 positive output 2 4
Analogue Audio ANA2 negative output 2 17
Analogue Audio ANA2 positive output 3 15
Analogue Audio ANA2 negative output 3 3
Analogue Audio ANA2 positive output 4 1
Analogue Audio ANA2 negative output 4 14
Ground 2, 5, 8, 11,16,19, 22, 25