Rear panel connections – NewHank Workmate User Manual
Page 5
26.
CUE CH 1 - Sends the channel 1 pre-fader signal to the headphones when engaged.
27.
CUE CH 2 - Sends the channel 2 pre-fader signal to the headphones when engaged.
28.
CUE CH 3 - Sends the channel 3 pre-fader signal to the headphones when engaged.
29.
CUE CH 4 - Sends the channel 4 pre-fader signal to the headphones when engaged.
30.
MASTER MONITORING - Sends the Output signal to headphones when engaged.
31.
HEADPHONES VOLUME- Adjusts the headphone output level.
32.
HEADPHONES - 6.3MM Stereo Headphone connector.
33.
POWER SWITCH -- Mains power ON/OFF switch. Before you turn on the power, be sure that you
have made all connections to the mixer. Also check that amplifiers are turned off. Remember mixer on
first and turned off last.
REAR PANEL CONNECTIONS
Figure 2
34.
CH1 PHONO1 – Turntables can be connected to these jacks. The red colored RCA jack represents
the right channel input and the white jack the left channel input.
35.
CH1 LINE1 -- Do not connect turntable’s to these jacks. CD players, Tape decks or other line level
sources can be connected. The red colored RCA jack represents the right channel input and the
white jack the left channel input.
36. CH2 AUX1 --Do not connect turntable’s to these jacks. CD players, Tape decks or other line level
sources can be connected. The red colored RCA jack represents the right channel input and the
white jack the left channel input.
37. CH2 PHONO2 – Turntables can be connected to these jacks. The red colored RCA jack represents
the right channel input and the white jack the left channel input.
38.
CH2 LINE2 -- Do not connect turntable’s to these jacks. CD players, Tape decks or other line level
sources can be connected. The red colored RCA jack represents the right channel input and the
white jack the left channel input.
39. CH3 AUX2 --
Do not connect turntable’s to these jacks. CD players, Tape decks or other line level
sources can be connected. The red colored RCA jack represents the right channel input and the
white jack the left channel input.
40. CH3 LINE3 -- Do not connect turntable’s to these jacks. CD players, Tape decks or other line level
sources can be connected. The red colored RCA jack represents the right channel input and the
white jack the left channel input.
page 5
NEWHANK
Workmate Instruction Manual