Nortec GS Series - Manual (Page 7)

GS Series Installation | 4
General
This installation guide has been designed to provide assistance when installing, mounting, and
commissioning a GS Series humidifier. Actual on site application may vary. Consult Technical Services or
your local Nortec representative.
Warning
Improper installation, adjustment, alteration, service, maintenance, or use can cause carbon monoxide
poisoning, an explosion, fire, electrical shock, or other conditions which may cause personal injury or
property damage. Consult a qualified installer, service agency, local gas supplier, distributor, or branch for
information or assistance. The qualified installer or agency must use only factory authorized and listed kits
or accessories when modifying this product. A failure to follow this warning can cause electrical shock, fire,
personal injury, or death.
Should overheating occur, or the gas fails to shut off, shut off the manual gas valve to the appliance before
shutting off the electrical supply.
Do not use this appliance if any part has been under water. Immediately call a qualified service technician
to inspect the appliance and to replace any part of the control system and any gas control which has been
under water.
Delivery
The standard delivery includes:

Gas Steam humidifier equipped with desired options.

In a bag you will find:
o Manuals.
o Adapter fittings for water connection.
o Steam hose for steam outlet with clamps.
o Hose and clamps for drain connection.
The GS Indoor Series offers an optional telescopic stand mounted inside the unit legs. Stand cross bracing
are shipped with the unit.
The GS Outdoor Series comes with all required venting to be installed on site.
Desired accessories ordered.
Receiving And Unpacking Equipment

Check packing slip to ensure ALL material has been delivered.

All material shortages are to be reported to Nortec within 48 hours from receipt of goods. Nortec
assumes no responsibility for any material shortages beyond this period.

Inspect shipping boxes for damage and note on shipping waybill accordingly.

After unpacking, inspect equipment for damage and if damage is found, notify the shipper promptly.

All Nortec products are shipped on an F.O.B. factory basis. Any and all damage, breakage or loss claims
are to be made directly to the shipping company.