Nortec LINKS XPS MH - Manual (Page 27)

Links XPS for MHTC | 24
Part B: Device Instance and MAC address different values
First, ensure the addressing dipswitches (mentioned in Part A) for Bank SW3 are all set to OFF
or are set to 128 or higher. Also ensure your Baud rate dipswitches are properly set (Bank SW4)
see previous chapter for details.
The device instance and BACnet MAC address can now be changed to be different values using
a free software tool. To obtain this program, visit the link below, and then download and install
the latest version of the “Utility Software” (8 MB file called Install.zip).
www.protocessor.com/tech-support/utilities-and-design-documents.php
Figure 17: Retrieval of Protocessor Software Tool