Obvius BACnet User Manual
Bacnet® server for acquisuite, By mark n. shepard
Advertising
BACnet Server for AcquiSuite
Page 1 of 52
CVS:bacnet/Documentation/BACnet_Users_Guide.doc
BACnet® Server for AcquiSuite®
by
Mark N. Shepard
BACnet is a registered trademark of ASHRAE. ASHRAE does not endorse,
approve or test products for compliance with ASHRAE standards. Compliance of
listed products to the requirements of ASHRAE Standard 135 is the responsibility
of BACnet International (BI). BTL is a registered trademark of BI.
Applies to: Obvius_BACnet, v02.13.
0312
_01 or later
Document revised: 5/10/2013
Advertising
Table of contents
Document Outline
- 1 Overview
- 2 Planning Your Deployment
- 3 Installation
- 4 Setup
- 5 BACnet Device List
- 6 BACnet Discover
- 7 How Do I...
- 7.1 How Do I... Choose Device IDs and Network Numbers?
- 7.2 How Do I... Choose Timeouts?
- 7.3 How Do I... Optimize Response Time?
- 7.4 How Do I... Optimize Polling?
- 7.5 How Do I... Fix Unit Issues?
- 7.6 How Do I... Use Relay Outputs?
- 7.7 How Do I... Span Subnets with a BBMD?
- 7.8 How Do I... Span Subnets with Foreign Device Registration?
- 8 Troubleshooting
- 8.1 Symptom: Not BTL Listed?
- 8.2 Symptom: Can’t “Discover” the AcquiSuite?
- 8.3 Symptom: “Discovery is Broken or Not Working” or “My Controller Doesn’t Support Discovery”?
- 8.4 Symptom: BACnet Timeout or Communication Errors?
- 8.5 Symptom: Data Values are not Updating (not Refreshing)?
- 8.6 Symptom: Can’t Write (to Relays)?
- 8.7 Symptom: Relays Turn On When They Shouldn’t?
- 9 BACnet Background
- 10 Common Wireshark Filters