Olson Technology S450P Series - Manual (Page 6)

025-000485 REV x1 Page 6
2.1 Installation
(continued)
2.2 Rear Panel IF Connections
The IF output of the input tuner and the IF input of the output tuner are made available at the rear panel of the
S450P to permit flexible application of the unit, such as:
1: Using the input tuner only (RF input / IF output)
2: Using the output tuner only (IF input / RF output)
3: Using both tuners to employ the unit in the processor mode. For this application, the IF IN and the IF OUT
F-connectors are connected (Figure 2-2); a jumper cable is provided in the accessory package for this
purpose. The following procedures assume that the unit is being used in the processor mode.