DigiTech RP255 - Manual (Page 36)

30
VibroPan (vibpan)
A vibrato is an effect that modulates the pitch of the incoming signal. This will take the whole signal
slightly in and out of tune at a steady pace. The VibroPan also incorporates an automatic panner
with the vibrato effect that creates a lush chorus-like sound.
Speed - Knob 2 adjusts how fast the signal is being modulated.
Depth - Knob 3 adjusts the amount of pitch change.
Vibrato/Pan- Knob 4 adjusts the amount of panning incorporated with the vibrato effect.
When the “Vib” control is at “0”, this effect is a standard vibrato. As the Level parameter is
turned up, the phase difference of the vibrato signal sent to the two channels is changed until
a full stereo image is obtained at “99”.
Waveform (X-Edit TM only) - Selects a waveform: triang, Sine, or Square.
Tremolo (trMoLO)
A Tremolo effect modulates the volume of the signal at an even rate.
Speed - Knob 2 adjusts the rate (Speed) at which the volume modulates. Ranges from 0 to
99.
Depth - Knob 3 adjusts the intensity (Depth) of the modulating volume. Ranges from 0 to
99.
Waveform - Knob 4 selects a waveform: triang, Sine, or Square.
Panner (PAnner)
An Auto Panner modulates the sound from left to right at an even rate.
Speed - Knob 2 adjusts the rate (Speed) at which the signal pans from side to side. Ranges
from 0 to 99.