Permasteel PG-50404S0L - Manual (Page 11)

8
ASSEMBLY INSTRUCTIONS
STEP VI:
ƒ
Use five 1/4-20x1/2” screw to attach left side shelf from inside of firebox.
ƒ
Use one 1/4-20x1/2” screw to attach left side shelf from outside of firebox.
ƒ
Underneath the left side shelf, use one 5/32-32x1/2” screw to fix left side
angle iron to control panel.
ƒ Repeat above steps to attach right side shelf and right side angle iron.
ƒ Install side burner handle on side burner lid.
ƒ Unwrap & then place the flame tamers over the burners.
ƒ Slide grease tray under firebox, place cooking grids onto firebox.
STEP VII:
1. Put regulator and hose assembly inside the cart, make sure to place under
right transom.
2. Remove packing materials.
3. Use the provided hexagon wrench to loosen (don’t remove) the setscrew
from control knob, and pull of the control knob.
4. Unscrew two M4*6 screws from front of side burner valve.
5. Unscrew the four screws on side burner bracket A,B & C which attach burner.
6. Open side burner lid, remove the cooking grid.
7. Remove side burner from side burner shelf through top of side burner shelf.
8. Beneath side burner shelf, place side burner valve steam comes through
large opening of side burner control panel.