Leak testing, Leak testing final installation checklist – Permasteel PG-4030000L User Manual

Page 12

Advertising
background image

10

ƒ

SAFETY TIPS:

1) ALWAYS CHECK FOR LEAKS AFTER EVERY TANK CHANGE.
2) ALWAYS CHECK FOR LEAKS BEFORE EACH USE.
3) USE LONG BBQ TOOL TO AVOID BURNS.
4) CHECK ALL GAS SUPPLY FITTINGS FOR LEAKS BEFORE EACH USE. IT

IS HANDY TO KEEP A SPRAY BOTTLE OF SOAPY WATER NEAR THE
SHUT-OFF VALVE OF THE GAS SUPPLY LINE. SPRAY ALL THE FITTINGS.
BUBBLES INDICATE LEAKS.

5) DISCONNECTED CYLINDERS MUST HAVE THREADED VALVE PLUGS

TIGHTLY INSTALLED, AND MUST NOT BE STORED IN A BUILDING,
GARAGE, OR ANY OTHER ENCLOSED AREAS.

6) TURN OFF ALL CONTROL KNOBS AND TANK VALVE WHEN THE GRILL IS

NOT IN USE.

7) IF THE APPLIANCE IS STORED INDOORS, THE TANK MUST BE

DISCONNECTED AND REMOVED FROM THE GRILL.

8) TANKS MUST BE STORED OUTDOORS IN A WELL-VENTILATED AREA.

DISCONNECTED TANKS IN STORAGE OR BEING TRANSPORTED MUST
HAVE A SAFETY CAP.

9) NEVER LEAVE A TANK IN A RECREATIONAL VEHICLE OR BOAT WHICH

MAY BECOME OVERHEATED BY THE SUN.

10) DO NOT STORE TANK IN OR NEAR AN AREA WHERE CHILDREN PLAY.
11) FOR ANY OTHER PROBLEMS, SEE “TROUBLESHOOTING” OR CONTACT

OUR SERVICE CENTER.

‰

At least 36” clearance maintained from combustible constructions to the sides
and back of this grill.

‰

There is no unprotected combustible construction material over the grill.

‰

All internal packaging has been removed.

‰

Burners are sitting properly on valve orifices.

‰

Knobs turn freely.

‰

The regulator & hose connected to grill are provided by the manufacturer. Unit
tested and free of leaks.

‰

User informed of gas supply shut off valve location.

LEAK TESTING

FINAL INSTALLATION CHECKLIST

Advertising