Dolby Laboratories RC2573GR - Manual (Page 18)

17
Select an input source
TUNER, AV, SVIDEO, CVI, • VGA,
HDMI1, HDMI2, CARD-CVBS,
CARD-YC, CARD CVI, SIDE AV or
SIDE SVIDEO
Note: CARD-YC, CARD CVI, D
CARD-CVBS, SIDE AV and SIDE
SVIDEO are available on certain models
only.
CHANNEL INSTALL
CHANNEL TV 2
INPUT TUNER
DIGITAL NO
RINGS (1 ) (2 ) (3 ) (4 )
LABEL ( ) >
MUTE NONE
CHANNEL INSTALL
Selecting Digital Channel Options
If the current channel you are mapping •
is a digital or high definition channel,
use
Н Ж to select YES. Selecting NO
removes the DIGITAL CH SCROLL,
DIGITAL MAJOR CH and DIGITAL
MINOR CH. Since the channel is not
digital, these options do not appear in
the menu.
CHANNEL INSTALL
CHANNEL TV 2
INPUT TUNER
DIGITAL CH SCROLL >
DIGITAL MAJOR CH 1
DIGITAL MINOR CH 0
RINGS (1 ) (2 ) (3 ) (4 )
LABEL ( ) >
MUTE NONE
CHANNEL INSTALL
DIGITAL YES
If • NO is selected in the USE
CHANNEL TABLE (see Selecting a
virtual or physical channel on page 20 ), the
options for DIGITAL MAJOR CH and
DIGITAL MINOR CH are replaced
with the options of RF CHANNEL
NUMBER and MPEG PROGRAM
NUMBER.
CHANNEL INSTALL SETUP
LANGUAGE ENGLISH
COMMUNICATION >
CHANNEL INSTALL >
AUTO INSTALL TV >
CABLE TUNING YES
USE CHANNEL TABLE NO
CURRENT RING RING1
DIGITAL SETUP >
CONFIGURATION >
CHANNEL INSTALL
CHANNEL TV 2
INPUT TUNER
YES
DIGITAL CH SCROLL >
RF CHANNEL NUMBER 8
MPEG PROGRAM NUMBER 2
RINGS (1 ) (2 ) (3 ) (4 )
LABEL ( ) >
MUTE NONE
CHANNEL INSTALL
DIGITAL
Scrolling the Digital Channels
If • YES is selected, press Н Ж to go the
previous or next digital channel.
CHANNEL INSTALL
CHANNEL TV 2
INPUT TUNER
DIGITAL YES
DIGITAL CH SCROLL >
DIGITAL MAJOR CH 1
DIGITAL MINOR CH 0
RINGS (1 ) (2 ) (3 ) (4 )
LABEL ( ) >
MUTE NONE
CHANNEL INSTALL
Searching the Digital Major Channels /
RF Channel Number
For • DIGITAL MAJOR CH / RF
CHANNEL NUMBER, key in the
channel number (1 to 999) using 0 - 9.