Dolby Laboratories RC2573GR - Manual (Page 39)

38
Appendix A 11.
Support for multiple remote
controls
Programming the Multi Remote
Controls function
Multi RC function supports up to four
TV sets operating in one room without
any interference from each other remote
controls. Each Guest Remote Control must
be programmed individually to one of the
four color (Blue, Yellow, Green and Red)
buttons on the remote control.
Press the 1.
button on the green
remote control (RC2573GR) to activate
the TV SETUP Menu.
Press 2. ï to select
COMMUNICATION.
SETUP
LANGUAGE ENGLISH
COMMUNICATION >
CHANNEL INSTALL >
AUTO INSTALL TV >
CABLE TUNING NO
USE CHANNEL TABLE NO
CURRENT RING RING1
DIGITAL SETUP >
CONFIGURATION >
Press 3. Æ to enter the
COMMUNICATION menu.
COMMUNICATION
COMMUNICATION MULTI RC
STORE >
REMOTE CONTROL
BLUE
Press 4. Æ repeatedly until MULTI RC is
selected.
Press 5. ï to select REMOTE
CONTROL.
COMMUNICATION
COMMUNICATION MULTI RC
STORE >
REMOTE CONTROL YELLOW
Press 6. Æ repeatedly to toggle through the
four colors and select your preferred
color.
Press 7. Î to select STORE and press Æ
to store your selection. Press
to exit
menu.
Using the Guest Remote Control, 8.
press MENU and any color key
simultaneously to set the remote
control to the corresponding color that
you have selected in the REMOTE
CONTROL option. If BLUE is
selected on the REMOTE CONTROL
option, correspondingly, you must select
BLUE on the Guest Remote Control.
You can now use the Guest Remote
Control to operate the TV set.
To check whether you have programmed 9.
the MULTI RC function correctly, aim
the Guest Remote Control at the TV
and press OK for five seconds.
Information of the Remote Battery,
Remote Color and the TV Color are
shown on the screen. If the Remote
Color and the TV Color do not match,
you need to re-programme and ensure
they match to enable the Guest Remote
Control to operate the TV.