Packaging, shipping and complaint, Warranty and products return, Installation and disclaimer – Proel X30TB User Manual

Page 9: Power supply and maintenance

Advertising
background image

9

PACKAGING, SHIPPING AND COMPLAINT

• This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit conditions immediately after
unpacking it.
• If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspection.
• Proel is not responsible for any damage that occurs during shipment.
• Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.
• Damages to unit should be immediately notifi ed to forwarder. Each complaint for manumitted package should be done within
eight days from receipt.

WARRANTY AND PRODUCTS RETURN

• Proel products have operating warranty and comply their specifi cations, as stated by manufacturer.
• Proel warrants all materials, workmanship and proper operation of this product for a period of two years from the original
date of purchase. If any defects are found in the materials or workmanship or if the product fails to function properly during
the applicable warranty period, the owner should inform about these defects the dealer or the distributor, providing receipt or
invoice of date of purchase and defect detailed description. This warranty does not extend to damage resulting from improper
installation, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been properly
used and warranty is still valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any "direct damage"
or "indirect damage" caused by product defectiveness.

INSTALLATION AND DISCLAIMER

• Proel products have been expressly designed for audio application, with signals in audio range (20Hz to 20kHz). Proel has no
liability for damages caused in case of lack of maintenance, modifi cations, improper use or improper installation non-applying
safety instructions.
• The installation of these speakers is provided for indoors, in case of use outdoors be sure that the speakers are installed correctly
in a safe location protected from wind, rain and umidity.
• The installation of these speakers is provided for wall mounting by means of specifi c wall brackets able to support their weight.
Fix the wall bracket to the wall using appropriate fi xings.
• Always know the working load limit of the structure supporting the loudspeakers. Always make sure that the fi xings minimum
rating is at least fi ve times the actual load, speakers and wall brackets.
• In case of installations of active loudspeakers where is not possible to turn on and off the speakers from their appropriate
switches, we recomend to install switches on the mains lines, for this purpose consult an expert electrician for the exact
dimensioning of wiring.
• Locate the speakers as far away as possible from radio or television receivers or other sensitive equipment. These speakers
have a strong magnetic fi eld which can induce hum and noise into unshielded devices that are located nearby with consequent
deterioration of reception of image and sound.
• Proel S.p.A. declines any liability for damages to objects or persons caused by lacks of maintenance, improper use, installation
not performed with safety precautions and at the state of the art.

POWER SUPPLY AND MAINTENANCE

• Clean only with dry cloth.
• The amplifi ed loudspeakers of Proel have been designed with CLASS I construction and must be connected always to a mains
socket outlet with a proctetive earth connection (the third grounding prong).
• Before connecting the product to the mains outlet make certain that the mains line voltage matches that shown on the rear
of the product, a tolerance of up to ±10% is acceptable.
• Inside the amplifi ed loudspeakers are present special safety devices such as:

Amplifi er over-heating protection.

Protection against excessive power applied at each speaker.

• Inside the passive loudspeakers are present special safety devices such as:
Protection against excessive power applied at HF-driver speaker.

WARNING: THE REPLACEMENT OF FUSES INSIDE THE APPARATUS MUST BE MADE ONLY BY QUALIFIED PERSONNEL.

english

Advertising
This manual is related to the following products: