Proel NEOS152PX User Manual

Neos152px, User manual, Passive loudspeaker

Advertising
background image

USER MANUAL

NEOS152PX

passive loudspeaker

KEY FEATURES

• Premium transducers
• Rotatable asymmetric HF horn
• HF driver protec on
• Plywood cabinets with die-cast handles, dual-angle pole holder and mul ple fl ying points

INTRODUCTION

NEOS PX series represents the highest expression of PROEL GROUP Research & Development applied in loudspeaker systems. A natural evolu on
of the NEOS Series, it incorporates the latest technologies developed by PROEL in advanced sound reinforcement systems able to provide premium
sound, maximum performance and up-to-date features.
The NEOS PX are designed for the use both as high-performance mobile systems for live applica ons and for advanced fi xed installa ons.
The NEOS PX are able to provide an excep onal sound defi ni on together with very high dynamics and low distor on in an ultra-compact
package.
The NEOS PX passive fi lters are provided with a protec on on circuit for the HF driver, which has a two-step opera on: the fi rst step reduces the
power accordingly to the music content and without an audible eff ect; if a too high power level is present for a long period of me, the second
step shut the HF driver off .

TECHNICAL SPECIFICATION

AcousƟ cal

Frequency Response Diagram

System type

Full range 2-way, vented

Low frequency driver

15’’ neodymium woofer - 4” VC

High frequency driver

2” compression driver - tanium diaphragm - 3” VC

Frequency response

40 Hz - 20 kHz

Horn type

Asymmetrical rotatable horn

Coverage

90°>60° H x 50° V

Max SPL

132 dB

Electrical
Nominal Impedance

8 ohm

Power Handling Con nuous

1000 W

Power Handling Peak

2000 W

Sensi vity

99 dBspl @ 1W / 1m

Passive Crossover Frequency

1200 Hz

Connectors

IN - LINK: Speakon® (NL4MP)

Controls

FULL-RANGE / BI-AMP opera on (internal jumper)

Mechanical
Construc on

15 and 18 mm birch plywood

Finish

An -scratch black paint

Flying hardware

6 x fl y tracks side and rear

Trapezoidal taper

10°

Monitor taper

42°

Pole holder

1 bo om dual angle (0° / 7.5°)

Dimensions (W x H x D)

450 x 770 x 490 mm

Weight

33 kg (72.7 lbs)

10k

5k

2k

1k

500

200

100

50

20

20

20k

Hz

110.0

dBSPL

100.0

90.0

80.0

70.0

60.0

Advertising
This manual is related to the following products: