PSE Archery TAC 2013 - Manual (Page 13)

CROSSBOW OWNER’S GUIDE CROSSBOW OWNER’S GUIDE
®
13
4. While continuing to hold the ratchet release lever down
(Figure 16), SLOWLY turn the crank in the “Let Down”
direction until the string is resting on the string stoppers.
NOTE:
When starting the let-down process (with bow at
fulldraw) you may hear a loud click. This is the
cocking bar in the release pivoting back over the
hammer and is normal.
Make sure that the crank is fully engaged and that
you hold it firmly during the let-down process. To
stop at any point during the let down, release the
ratchet release lever.
Do not let go of handle while release lever is
pressed or crank will free spin causing damage
to the bow and potential harm to the operator.
Fig. 16
Hold Ratchet Release
Lever Down while Cranking