RADO Chronograph_TheOriginal - Manual (Page 2)

Time change: time zone,
Summer/Winter time
Pull out the crown to position 1
and set the desired hour by turning
the crown. The minutes and seconds
remain the same.
Setting the date
Pull out the crown to position 1
and set the date by moving the
hour hand, i.e. for correcting the
date by one day the hour hand
must be moved 24 hours.
Chronograph
The chronograph enables mea-
surements accurate to 1 ⁄
10
th of a
second. The display appears in
hours, minutes, seconds and 10ths
of a second.
Normal function
This function serves for measur-
ing one event.
Start:
Press button A.
Stop:
Press button A again.
The measured time is now read-
able (in the example it is 6 hours,
56 minutes, 3 seconds and
3 ⁄
10
ths of
a second).
Reset to zero:
Press button B. All chronograph
hands are reset to zero.
The duration of several events
will be automatically added
together if the chronograph hands
are not reset to zero after the chro-
nograph has been stopped (button
A):
1st Start:
Press Button A.
1st Stop:
Press button A. The first time mea-
surement can be read.