RADO International_Guarantee - Manual (Page 5)

Instructions for watches with
automatic winding
Setting the time
For correction of hours, minutes,
and seconds, pull the crown out to
position 2. Set the correct time by
turning the crown forwards or
backwards.
The second hand remains still in
crown position 2. The seconds can
be synchronized with the official
time signal by pushing the crown
back to position 0.
For watches with date display
Pull the crown out to position 1
and turn it to the desired date.
For watches with day display
Pull the crown out to position 1
and turn anticlockwise.
Upkeep and maintenance
For perfect maintenance, please
make use of an authorized Rado
dealer or Rado Service Centre at
regular intervals. Metal bracelets
can be cleaned without difficulty
by bathing them in lukewarm
soapy water. This cleaning is espe-
cially recommended after contact
with sea water.
For watches with special func-
tions (e.g. multifunction watches)
please refer to the appropriate
special instructions.