Dometic RM2191 & RM2193 - Manual (Page 3)

3
6. CLEARANCES
Minimum clearances in inches to combustible materials
are:
G G G G G: Top 0"
K K K K K: Side 0"
LLLLL: Bottom 0"
M M M M M: Rear 1"
N N N N N: See NOTE
P: P: P: P: P: See NOTE
NOTE NOTE NOTE NOTE NOTE: Clearance "M M M M M" is between the rearmost part of
the refrigerator and the wall behind the refrigerator.
NOTE NOTE NOTE NOTE NOTE: Clearance "N N N N N" is the distance between the
bottom of the lower vent to the top of upper side vent.
For ventilation height, refer to Section A. Installation,
Item 5. Ventilation Heights . See FIG. 2.
Surfaces directly above and sides adjacent to the Surfaces directly above and sides adjacent to the Surfaces directly above and sides adjacent to the Surfaces directly above and sides adjacent to the Surfaces directly above and sides adjacent to the
flue outlet must be of, or covered with, fireproof flue outlet must be of, or covered with, fireproof flue outlet must be of, or covered with, fireproof flue outlet must be of, or covered with, fireproof flue outlet must be of, or covered with, fireproof
material. See FIG. 2. material. See FIG. 2. material. See FIG. 2. material. See FIG. 2. material. See FIG. 2.
NOTE NOTE NOTE NOTE NOTE: Clearance "P" "P" "P" "P" "P" over top of unit condenser fins
is 1/4 inch. This is the minimum height which can be
allowed over the condenser fins. Whenever possible,
increase this height by up to 11 inches; the more
ventilation you provide, the better the performance you
can expect from the refrigerator.
Minimum Ventilation
Heights In:
5. VENTILATION HEIGHTS
Refer to FIG 1 & FIG. 1A., Pages 2 & 3
Installation with upper side Installation with upper side Installation with upper side Installation with upper side Installation with upper side
vent and lower side vent
vent and lower side vent vent and lower side vent vent and lower side vent vent and lower side vent
REFRIGERATOR REFRIGERATOR REFRIGERATOR REFRIGERATOR REFRIGERATOR INCHES INCHES INCHES INCHES INCHES MM MM MM MM MM
*Min. Max. *Min. Max. *Min. Max. *Min. Max. *Min. Max. *Min. Max. *Min. Max. *Min. Max. *Min. Max. *Min. Max.
RM2191, RM2193 20-5/8 31-5/8 524 803
* This is the minimum height allowable. Where
possible, increase the minimum height by 11
inches (279mm) for a better air flow and cooling
performance.
FIG. 1A
FIG. 2 FIG. 2 FIG. 2 FIG. 2 FIG. 2