Important, Caution, Tools – Royal Vacuums UR30090 User Manual

Page 14: Select proper tool, Carpet height adjustment, Transporting cleaner, Handle positions

Advertising
background image

A. Use Dusting Brush to clean upholstered furniture,

draperies, mattresses, clothing, and carpeted stairs.

B. Air-Powered Hand Tool may be used for

upholstered furniture, draperies, mattresses, clothing,

and carpeted stairs.

C. Telescoping Wand is used to give extra length

to your hose. Use it with any of the above tools.

D. Crevice Tool may be used in tight spaces,

corners and along edges in such places as

dresser drawers, upholstered furniture, stairs and

baseboards.

3.1

Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.

The vacuum is ready for tool use when handle is in upright position.

3. TOOLS

SELECT PROPER TOOL

7

B

Actual model may vary from images shown.

A

2.7 To adjust height setting, PUSH DOWN and

TURN knob (A) to desired height setting.

For maximum cleaning performance, the following

carpet height settings are recommended:

• Lowest setting (1): for bare floors.

• Low setting (2): for all types of carpet.

• Higher settings: for very deep pile carpet,

where easier pushing effort is desired, while

maintaining good cleaning performance.

2.7

If the vacuum is difficult to push, push down and

turn knob to the next higher setting.

CARPET HEIGHT ADJUSTMENT

IMPORTANT

C

D

TRANSPORTING CLEANER

2.6 To move your

cleaner from room to

room, put handle in

upright position, tilt

cleaner back on rear

wheels and push

forward.

2.6

HANDLE POSITIONS

2.5

2.5 The handle of your

cleaner has two

positions: 1) Upright for

storage and when using

cleaning tools. 2)

Operating position for

general operation on

carpets and floors.

Step on handle release

pedal to lower handle.

1

2

CAUTION

!

!

Not to be used for grooming a pet.

A

Advertising
This manual is related to the following products: