Sensoray 2251 Rev.A - Manual (Page 28)

JPEG frames, no rendering is performed. No DirectShow filters are required to be installed for
MJPEG mode to function.
Parameters
mode
MID2250_OPMODE_NORMAL – normal operation mode,
MID2250_OPMODE_MJPEGCAPTURE – MJPEG capture mode.
board
board number in the system (use 0 for single board setups).
Returns
0 if success, negative if error.
Example
The following code illustrates simple capture of JPEG compressed frames in MJPEG mode.
int main()
{
int i;
char filename[260];
SN_Open( NULL);
SN_SetOpMode(MID2250_OPMODE_MJPEG_CAPTURE);
SN_SetEncodeType( MID2250_ENCODE_MOTIONJPEG);
SN_SetBitrate( 6000000); // Controls JPG picture quality
SN_StartStream( );
for( i = 0; i< 50; i++)
{
sprintf(filename, "c:\\snapshot%03d", i);
SN_SnapshotToFile(filename, MID2250_FILE_JPEG);
}
SN_StopStream();
SN_Close();
return 0;
}
MID2250_API int SN_GetNumBoards(
int *pNumBoards
);
Retrieve the number of boards in the system.
Parameters
pNumBoards
Returns the number of boards.
Returns
28