Sensoray 2251 Rev.A - Manual (Page 39)

• Enter 720 for BR_x and 320 for BR_y.
• Click OK.
• Start stream (if not already started).
• Select View->MDRegions. Region selected above will be shown on the image.
• Select View->MDStats. A macro-block map with detailed hits for region 1 above will be
shown along with a counter of the number of hits in region 1.
• To disable motion detection, call SN_StopMD or in the demo app, disable all MD regions.
Motion Map Example
Example 1: Three regions of interest
The following motion detection regions were defined. An overlay of the defined regions can be seen by
selecting View->MDRegions on the menu bar.
39