Smart Avi CATSwitch - Manual (Page 13)

13
www.smartavi.com
The Main Routing Window enables you to control the router(s) connections by means of the CATSWITCH panel, the
button panel, or with pre-recorded routes called macros.
CATSWITCH Panel: This is probably the simplest way to route the connections. Simply click on the cross point itself. The
input on the left will then be routed to the output above.
Note: Inputs can be routed to several different outputs, but each output can only have a single input at any one time.
So you can have several connections horizontally but not vertically.
The Button Panel: These are the numbered buttons across the top and left sides. Click an output button on the top,
and then click an input button on the left.
Options for using the Button Panel
• Output Options:
To select multiple outputs next to each other, click on one output, then hold the shift key down and click the last
output. When the input is clicked, it is routed to all selected outputs.
To select multiple outputs individually, hold the control key down and click on any number of outputs. When the
input is clicked, it is routed to all selected outputs.
• Input Options:
To route an input to all the outputs at once, hold the control key down and click on an input.
To leave the outputs selected after the route is made, hold the shift key down and click on an input.
Software Operation (continued)