Operation – Smithco Sand Star Zee (ZTR) 45-500-A Operator Manual User Manual
Page 14
12
Service
PARTS MANUALS AVAILABLE ONLINE AT smithco.com
OPERATION
CENTER LIFT
Using the foot pedal on the left floorboard and the center lift lever you
can raise and lower the center lift. To lift, push right foot pedal all the
way down and the center lift lever will lock into place. To lower, place
pressure on the foot pedal, place detent pin in hole for correct depth
you are trying to obtain, push center lift lever inward and release pedal.
Detent pin will stop center lift at selected depth.
MANUAL REAR LIFT (45-500)
Using the foot pedal on the right floorboard. Push all the way down to
lift. The arm will lock on the lever on the right floorboard. To lower, put
some pressure on the right foot pedal and with your hand push lift lever
outward and release foot pedal slowly.
MANUAL REAR LIFT STOP ADJUSTMENT (45-500)
The threaded adjustment knob, located on left side of rear lift bar can
be used to limit the downward travel of rear attachment during wet
conditions.
Wet Conditions - When the knob is threaded inward, the lift bar will
hold the front of the attachment above the ground surface.
Dry Conditions - When working in dry conditions, turn the knob coun-
terclockwise, all the way out.
ELECTRIC/HYDRAULIC REAR LIFT (45-501)
To lift and lower the rear attachments on the 45-501, use the rocker switch on the right control lever. Pushing
the switch up will raise the rear attachment. Pushing the rocker switch down will lower the rear attachment.
Rear Electric Lift
Rocker Switch