106 fresh water wash tank parts list, Installation instructions, Accessories – Smithco Spray Star 1000 (sn 100199 – 100223) Parts & Service Manual User Manual
Page 123
121
Accessories
10-106 FRESH WATER WASH TANK PARTS LIST
REF#
PART#
DESCRIPTION
QUANTITY
1
HB-516-18-075
Bolt
5
/
16
- 18 x
3
/
4
4
HWL-516
Lock Washer
5
/
16
4
HW-516
Washer
5
/
16
4
2
10-216
Fresh Water Tank Bracket
1
3
HB-38-16-200
Bolt
3
/
8
-16 x 2
2
HNTL-38-16
Lock Nut
3
/
8
-16
2
4
10-234
3 Gallon Rectangular Tank
1
5
16-158
Close Nipple
3
/
4
x
3
/
4
1
6
16-960
Spigot
3
/
4
NPT
1
7
16-151
Elbow FPT
3
/
4
x
3
/
4
1
INSTALLATION INSTRUCTIONS
1. Fresh Water Wash Tank mounts on the left side of the horizontal boom support.
2. Insert the close nipple into the bottom of the tank. Then place the elbow on the close nipple so it is
pointing away from the machine. Place the spigot into the elbow. For best results use plumbers tape on all
fittings.
3. Place the mount bracket onto the boom support using the two
3
/
8
bolts and lock nuts.
4. Line holes on the tank with holes on the mount bracket and use the
5
/
16
bolts to fasten tank to mount
bracket.
5. Rinse tank with clear water and check for leaks around fittings.
This tank is for fresh clear water ONLY. Do not put chemicals in this tank.