Soundtube SM890i - Manual

Box contents
1 Speaker
1 Terminal weather boot
1 Mounting bracket
1 Safety cable
1 Euroblock connector
1 5 mm Allen hex key
1 Paint mask
© 2010 SoundTube Entertainment, Inc. All rights reserved. PN INS-SM890i Rev 06.14.10
Install Instructions For:
SM890i
1.435.647.9555 | 800.647.TUBE | www.soundtube.com
Clamp knob
Mounting bracket
Tap switch
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Warning Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Grille
Grille retention knob
Terminal weather boot
Euro block
Signal wire
SM890i
Rotatable horn
3. To replace horn assembly,
insert horn 1/8 turn from final
position and rotate clockwise to
tighten. Horn is fully engaged
when horn baffle throat is
aligned with speaker.
4. Attach grille by pressing down
gently and rotating the retention
knob clockwise to vertical postion.
Grille retention knob will snap into
the matching recess in the grille
when fully engaged.
2. To release the horn, insert
hand into horn throat and twist
horn assembly counter-clockwise.
1. To remove the grille, rotate
the grille retention knob
counter-clockwise while gently
pushing down on the grille.
Remove the grille from the
speaker by pulling gently on the
grille retention knob.
The SM890i has a rotatable horn for 85° or 110° coverage.
Speaker ships in the 110º vertical (85º horizontal) position. To change to
85º vertical (110º horizontal), follow these directions:
110º
100v 70v 25v
6 Direct Direct Direct
5 X 150
19
4 150 75 10
3 75 38 5
2 38 19 2.5
1 19 10 1.3
Tap Setttings
85º 110º
85º