Spohn LX-604 User Manual
Page 2
10. After you have made any adjustments, tighten the jam nuts. Jam nuts are
known to work loose over time. To prevent this we recommend that after you have
the arms set to your desired length you apply some REMOVABLE strength (Blue)
Loctite® to the threads and then tighten the jam nuts on each end of the adjuster.
11. The bushings come pre-lubed. DO NOT use petroleum-based grease on your
bushings! The bushings must be lubricated with synthetic silicone based waterproof
grease. These are the manufacturer’s recommendations to prevent premature
bushing wear, and will keep things "squeak-free". You can order this grease from
Spohn Performance using our Part# 902. Do not over grease the bushings! You only
need a couple pumps of grease. Over greasing will cause the bushings to balloon
from the hydraulic pressure inside of the sleeve and they will fail.
2