Super Systems Gold Probe - Manual (Page 12)

11
SSi Gold Probe Manual Rev C
WARRANTY
 Super Systems Inc. (SSi), as manufacturer of the Gold Probe™, warrants
it to be free from defects in material and workmanship under normal
use and service. SSi’s obligation under this warranty is limited to
repairing or replacing, at its option, the sensor described herein, should
failure occur within the one-year warranty period. The warranty period
shall commence on installation of the sensor, as certified by receipt of
the postage free Registration Card accompanying the sensor. If
premature failure occurs, the sensor, along with the Warranty Claim
Report, must be returned in the complete, original packaging to SSi.
Upon receipt, SSi will conduct an examination as to the cause of failure,
at which time appropriate action will be taken.
 There are no warranties, expressed or implied, by the distributors or
representatives for the Gold Probe™, except the expressed warranty
against defects described above. There will be no applicable warranty in
the event of breakage resulting from thermal or mechanical shock.
Additionally there will be no applicable warranty for a probe that has
been subject to misuse, negligence or accident.
 For sensors operating at elevated temperatures, the warranty period is
prorated such that full warranty is granted for operation below 1850  F
(1010  C); six months warranty for temperatures between 1850  F
(1010  C) and 1950  F (1065  C); three months warranty between 1950  F
(1065  C) and 2050  F (1121  C), and no warranty above 2050  F (1121  C).
 This warranty cannot be honored unless the Registration Card is
received at SSi prior to the Warranty Claim Report, and the use and
installation is accomplished according to the techniques and procedures
described in the Gold Probe™ Manual. SSi shall in no way be liable for
special or consequential damages related to the use of this sensor.