Dynalink RTA230 - Manual (Page 21)

Chapter 3: Configuration
13
5. Click Yes to use DHCP.
6. Insert the Windows NT CD into your
CD-ROM drive and type the location of
the CD. Then click Continue.
7. Returning to the Network window, you
will find the TCP/IP Protocol among
the list. Select TCP/IP Protocol and
click Properties.
8. Enable Specify an IP address option.
Enter the IP Address: 192.168.1.x (x
is between 2 and 254) and Subnet
Mask: 255.255.255.0 and Default
Gateway: 192.168.1.1 as in figure
below.