Synaps THD-2800s - Manual (Page 12)

12 THD-2800s
Movie
1. In main menu to choose Movie item, Press OK key
to enter USB main directory.
2. Press OK key to enter next directory, every
directory displays only movie file and folder name
Press EXIT key to return previous directory
PVR
Press “ REC” key when watching TV, there is a
channel list which will list all channels available
for recording under current Transponder, user can
select one channel from the list and press OK to start
recording into hard disk. A Recording toolbar can be
accessed through remoter while recording. There are
four buttons on the toolbar, ◄◄ for fast-rewind,
|| for pause, ■ for stop, and ►► for fast-forward.
User can play back the recorded TS file, there are
seven buttons can be accessed through remoter on
the toolbar, |◄◄ for skip to previous stream,
◄◄ for fast-rewind, ►for play, || pause, ■ for stop,
►► for fast-forward, ►► | for skip to next stream,
and Time Locate button can be activated by
pressing any number key.
1.Plug the USB drive that with the update file to the
USB interface of the receiver.
2. While the upgrade progress showing 100% and
update finish, remove the USB flash drive and power
on the receiver again.
3.Please set the receiver to the factory settings after
reboot the receiver.
USB Software Update