Synaps THD-2800s - Manual (Page 13)

13 THD-2800s
Tuner
Input Connector IEC 16902. Female
Input Frequency Range VHF&UHF
Input impedance 75 ohm
RF output Connector (bypass)IEC 169-2 Male
Loop through 47-862 MHz
Demodulation
Standard ETSI EN300 744
Guard interval Modes 1/32,1/16,1/8 Active Symbol duration
FEC Modes Rate 1/2,2/3,3/4,5/6,7/8
Carriers/Constellation All modes supported including non hierarchical
Demodulation COFDM(QPSK/QAM16/QAM64) 2K and 8K
Network MFN/SFN
Channel bandwidth 7 and 8 MHz wide channel 21-68PLL
Video Decoder
Standard ISO/IEC 13818-2 and ISO/IEC 14496-10
Transport stream ISO/IEC 13818-1
Video decoding MPEG-2 SD/HD (MP@ML and MP@HL), MPEG-4 H.264/AVC SD/HD
DivX 3.X ~ 6.X
JPEG,BMP,PNG, Motion JPEG
AVI, VOB, MOV, MKV
Aspect ratio 4:3, 16:9
Audio Decoder
Standard ISO/IEC13818-3 TR1011154
Audio decoding MPEG-1 and MPEG-2 Layer I & II, Dolby Digital Audio, E-AC3,WMA and HE-
AAC Digital Audio
Dolby Digital (AC-3) Stereo down-mixing to analog and digital audio outputs (including HDMI).
For digital outputs, L-PCM stereo encoding is provided
Sample rate 32 kHz, 22.1 kHz, 44.1KHz,48 kHz
Subtitles & Teletext
Subtitle DVB Subtitle
Teletext EBU TELETEXT
Rear Panel
RF IN To be connected to the Antena cable
RF OUT Connect to other STB set.
Optical S/PDIF Digital Audio output
SCART TV SCART
HDMI Digital HDTV video output with HDCP. HDMI version 1.3
Front Panel
bi-colored LED Red / Green to indicate the various states of the STB
USB2.0 PVR Ready and software upgrade
Keys 3 keys (Standby, CH+, CH-)
Accessories
Remote control unit IR (36kHz) RC3 / other on request (38kHz)NEC
User Manual 1
Power
AC input range 12V/1.5A
Power consumption < 18W
Standby consumption < 2W
Physical
Operating Temperature +5 ~ 45 °C
Storage Temperature -10 ~ +70 °C
Specification