Quick start – System Fidelity SA-300SE User Manual
Page 6
6
CONNECTING THE SPEAKERS AND AUDIO SOURCES (CD, TUNER, DVD etc.)
Be sure to connect the polarities of the speaker system and the speaker terminals correctly (+ to +, - to -).
When make the connection, please refer to the connection diagram. Make sure that all the units are switched off during any
connection. The RCA sockets on your SA-300SE are color coded for your convenience. Red and white are RIGHT and LEFT audio
respectively.
Use high quality RCA-interconnect and speaker cables for optimum performance and reliability. Ensure that all cables and sockets
are not damaged in any way and all sockets are firmly pushed home.
QUICK START
1.
Connect the speakers to the speaker terminal and sources to the relevant terminals and rear input sockets on the back
panel of the unit.
2.
Plug in the AC power cord.
3.
Press the POWER switch on the back panel of the unit, and then press stand-by power switch on the front panel (or
remote controller) to turn on the amplifier.
4.
Press the required input selector. And enjoy.