System Fidelity ST-370 - Manual (Page 9)

ST-370 TUNER FUNCTIONS:
(1) Power: Sets the ST-370 in standby
mode.
(4) AM/FM: press to choose between
AM or FM mode
(5) 1-6 : Directly selects the first six
stored stations.
(6) MEMORY: press to store the tuned
station
(7) Autotune: Press for automatic
search in to AM/FM stations. At FM,
the autotune function will search for
a station at a higher frequency.
(9) RDS: Displays RDS and other
information.
(10) ST/MONO: press to choose
between stereo or mono reception (in
case of very weak signal, mono can
offer better sound without noise.
(12-13) Tuning: press + or - for
manual tuning.
(14-15) P (preset): press + or - for
selecting of the stored stations.
CD-370 CD-PLAYER FUNCTIONS:
(1) Power: Sets the CD-370 in standby
m o d e
(3) Eject: Opens the CD tray
(5) 1-6 : Selects desired track for
playback among first 6 tracks.
(11) PLAY/PAUSE: press once for
playback. If press during play, the disc is
paused. Press one more time for resume
play.
(12-13) SEARCH (
/ ): Search
backwards or forward.
(14-15) SKIP (I
/ I): Selects the
previous or the next track.
(16) Stop: Stops playback
(17) Random: All tracks are played in
random order
(18) Repeat: Repeats a single track or all
tracks on a CD
(19) Program: Allows playback of the
music tracks on a CD in a certain order
SA-370 AMPLIFIER FUNCTIONS:
(1) Power: Sets the SA-370 into standby
mode.
(2) Light: switches on and off the light around
the volume knob
(8) Mute: temporarily switches off the sound.
(20-24) Input buttons: Selects input source
of amplifier.
(24) SPKRS A/B: selects which pair of
speakers are playing.
(26) Volume +/-: Adjusts the master volume.
Note: Some of the amplifier functions can
only be performed by means of the remote
control. Some functions are connected with
the selected signal input source. Some
buttons on the remote control may therefore
not be available if the corresponding signal
input source has not been selected.
9
Remote control functions