Teac DR H338i - Manual (Page 41)

41
EN
G
LI
SH
HDMI
AUTO (Default)
Select this to have the signal output when your TV or monitor is
connected to the HDMI out terminal.
OFF
Select this when you do not use the HDMI out terminal.
No signal is output from the HDMI out terminal.
RESOLUTION
This setting is available only when your TV is connected to the HDMI
terminal, and the HDMI setting is set to “AUTO”.
Select proper resolution for your TV or monitor.
480P 60Hz (Default)
720P 60Hz
1080i 60Hz
1080P 60Hz
576P 50Hz
720P 50Hz
1080i 50Hz
1080P 50Hz
Settings (PREFERENCE) (1)
TV TYPE
PAL
Select this when the unit is connected to a PAL TV.
AUTO
Select this when the unit is connected to a MULTI TV.
NTSC (Default)
Select this when the unit is connected to an NTSC TV.
AUDIO, SUBTITLE, DISC MENU
You can select a preferred language for audio, subtitle and disc menu.
< When you select a preferred language that is not recorded on the
DVD, one of the recorded languages is automatically selected.
< You can override the AUDIO setting in the SETUP menu by pressing
the AUDIO button on the remote control unit while a DVD disc is
playing.
< You can override the SUBTITLE setting in the SETUP menu by
pressing the SUBTITLE button on the remote control unit while a
DVD disc is playing.
< Select OFF to turn subtitles off.
Note that subtitles on some discs cannot be removed even when
you select OFF.