Teac CD-RW901MKII - Manual (Page 19)

TASCAM CD-RW901MKII
19
4 − Playback operations
Playback modes
There are four different playback modes. The selected mode
will be indicated on the left of the display.
• Continuous playback mode (default setting): no indica-
tion lamp
• Single playback mode: SINGLE is lit
• Program playback mode: PROGRAM red lamp is lit
• Random playback mode: RANDOM red lamp is lit
The playback mode can be selected using the P.MODE
key on the remote control unit. Pressing the key changes
the playback mode on the display in the following order:
Continue ®Single®Program®Random
You can also select the playback mode using the PLAY MODE
option in the PLAY sub-menu (see “Operation basics” on
page 16). Turning the
MULTI JOG dial clockwise changes the
playback mode shown on the display in the following order:
Mode>Cont
®Mode>Single®Mode>Program®Mode>Random
Pressing the MENU key or pushing the MULTI JOG dial
returns to normal mode from the menu mode.
While the mode can be changed from any playback mode, the
explanation in this manual will assume the user is starting
from the Continuous mode.
NOTE
The selected playback mode remains after power is
turned off. However, the program playback mode will
be cleared to “Continuous” mode when the power is
turned off.
Continuous playback
Programing is cancelled, and playback continues in the
normal order.
1. When stopped, set the mode to display Continue or
Mode>Cont .
2. Press the PLAY key to begin playback in order of
the track number.
Index search
This Index search function allows you to search indexes within
a track that were assigned during recording (see “Automati-
cally Incrementing index numbers” on page 29).
Use the SKIP MODE in the PLAY menu (see “Operation
basics” on page 16) and select the item “Index”. The
MULTI
JOG dial or MENU (+/-) key on the remote control can be
used to select.
Index XX
appears on the display.
Select a track you want to assign indexes to, and put the unit
in playback or playback ready mode.
Use the ˚/¥ or ∆/˙ key to search through the indexes.
The unit locates to the index selected, and starts playback at
that point, or goes into playback ready mode after moving to
that point.
NOTE
The Index search function does not operate with
MP3 discs.
Time skip
While in playback or playback ready mode, Time skip
function allows you to move the playback position forwards or
backwards by a minute.
Use the SKIP MODE in the PLAY menu (see “Operation
basics” on page 16) and select the item “Time”. The
MULTI
JOG dial or MENU (+/-) key on the remote control can be
used to select.
Pressing the
˚/¥ or ∆/˙ key moves the playback
position one minute forwards or backwards. The unit locates
and starts playback at that point.
When the key is pressed in playback ready mode, the unit
locates and standbys at that point.
NOTE
If the ∆/˙ key is pressed at a time less than one
minute from the begging of a track, the unit skips to
the head of the track.
If the ˚/¥ key is pressed at less than one minute
from the end of a track, the unit skips to the begin-
ning of the next track. However, if the current track is
the last track on a disc or is the last track in program
playback mode, the unit stops and goes into playback
ready mode when the last track ends.
If the ∆/˙ key is pressed at less than one second
from the begging of a track, the unit skips to one
minute before the end of the previous track. Howev-
er, if the current track is the first track on a disc or in
program playback, and also when in random play-
back, the unit skips to the beginning of the current
track, and goes into playback ready mode.
The Time skip function does not operate with MP3
discs.