Teac K-05X - Manual (Page 27)

27
En
gl
is
h
Maintenance
Automatic power saving setting
Display: APS>***
o By default, the setting is 30m.
When the input source is CD/SACD, the unit will turn off automatically
if the set amount of time passes without a disc being loaded or with
the disc remaining stopped.
When the input source is COAX in, OPT in or USB in, the unit will turn
off automatically if the set amount of time passes without being able
to lock an input signal from the selected input source.
o The input sources that are not selected have no effect on auto-
matic power saving.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled.
Use a soft dry cloth to wipe the surface of the unit clean.
For stubborn smudges, use a damp cloth that has been thoroughly
wrung out to remove excess moisture.
V For safety, disconnect the power plug from the out-
let before wiping the unit.
o Never spray liquid directly on this unit.
o Do not use chemically-treated wipes, thinner or similar substances
because they could damage the surface of the unit.
o Avoid allowing rubber or plastic materials to touch the unit for long
periods of time because they could damage the cabinet.