Tendzone TYCHO T 1212/CA - Manual (Page 47)

Figure 44
- Bundle No.: each device is allowed to be set with 4 sending Bundle numbers at most. 0 is the invalid number, 1-255 is
the multicast number segment, 256-65279 is the unicast number segment, and 65280-65535 is the custom number
segment. Input the Bundle number in the edit box, press enter, and wait for device return. Refresh the edit box, until there
is data, and then setting is successful (the refreshing speed is fast usually). Note: only when the Bundle number of the
sending end of a device is identical with that of the receiving end of another device, a sending -> receiving connection can
be determined.
- Sub-channel: the corresponding channel under the bundle number. Each bundle number is allowed to carry 8-way
audio data at most at the same time. The value range is 0 and 33-32. 0 indicates not use, and 1-32 correspond to the
analog output signal 1-32 respectively, which can be modified according to the specific circumstances.
2.12 Audio output module