Thinklogical VX Routers Manual - Manual (Page 5)

®
V X R o u t e r M a n u a l R e v . O S e p t e m b e r , 2 0 1 4 Page 4
Preface
About this Product Manual
This product manual is divided into three sections: Hardware, Safety Requirements and Product Support.
These are sub-divided to help you find the topics and procedures you are looking for. This manual also
contains Appendices.
Part 1
– Hardware: This section of the manual contains all the information and instructions on how to
assemble your equipment.
Part 2
– Safety Requirements: Thinklogical strongly recommends that you read this section of the manual
prior to starting the hardware assembly.
Part 3
– Product Support: Thinklogical provides the best customer support available. If you have any
questions or need to contact the company, please refer to this section of the manual.
Note and Warning Symbols
As you read this manual you will notice certain symbols that bring your attention to important information.
These are Notes and Warnings. Examples are shown below.
Note: Important Notes appear in blue text preceded by a yellow exclamation point symbol, as
shown here.
A note is meant to call the reader’s attention to helpful information at a point in the text that is relevant to the
subject being discussed.
Warning! All Warnings appear in red text, followed by blue text, and preceded by a red stop
sign, as shown here.
A warning is meant to call the reader’s attention to critical information at a point in the text that is relevant to the
subject being discussed.
Laser Information
VX Routers, like all Thinklogical ® products, are designed and identified as Class 1 LASER products.
CLASS 1 LASERS do not require any special
precautions under conditions of normal use.
SFP
Modules
Fiber-Optic
Cables
Class 1 Lasers