Navigator 3000, Chrono mode, Alarm mode – Tissot 120 User Manual

Page 6: Expert mode

Advertising
background image

Navigator 3000

*

www.tissot.ch

120_EN / 01.06

6/7

Chrono mode

Your watch has a chronograph function.
When the period timed is less than 1 hour, the minutes, seconds and

hundredths of seconds are displayed.
When the period timed is greater than 1 hour, the hours, minutes and

seconds are displayed.

Touch the chronograph function on the

screen.

Press the crown to activate the

chronograph.

Press the crown to stop the

chronograph.

Press the crown for at least 2“ to reset

the chronograph.

2“

Your watch has two different day alarms, which can be set separately over

24 hours and/or over 7 days (see Expert mode).

At the programmed time, an audible alarm is triggered.

To stop the alarm, press the crown briefly.

Note: 5 tunes are available to choose from.

Touch the screen to select alarm 1 or

2 or to navigate through to the “SET“

function.

To access alarm setting, select the

“SET“ function and confirm by pressing

the crown.

Touch the screen several

times to access the alarm

you wish to change, then

press the crown to confirm

your choice.

Alarm activated

Alarm not activated

Set the hour and minutes by means of

the tactile zone or .

Confirm each setting by pressing the

crown.

Select a tune by means of the tactile

zone or .

(the tune sounds after 2“).

Confirm by pressing the crown.

Activate the alarm by means of the

tactile zone or .

Confirm by pressing the crown.

(by deactivating the “AL1 OFF“ alarm,

you exit setting mode).

Exit setting mode.

Setting the selected alarm

Setting the alarm over 7 days

See Expert mode.

5“

All the days of the week are

activated by default.

Deselect the days that you don't

wish to activate by means of

the tactile zone or .
Confirm the day and go to the

following day by pressing the

crown.

When an alarm is activated,

press the crown for 5“ to access

weekly setting of this alarm.

Alarm activated

over 7 days

Setting the alarm over 7 days

You can set an alarm so that it

sounds on different days of the

week at a fixed time.

Comments: Day 1 corresponds to Monday, day 2 to Tuesday, and

so on…

By combining your two alarms and the setting for the

days, you can very easily create one alarm for the

week and another for the weekend.

Alarm mode

Expert mode

Advertising
This manual is related to the following products: