Tri Tool Boilermaster Beveler Standard - Manual (Page 16)

16
TRI TOOL INC.
92-0629 : Rev. 080714
NOTE:
OPERATION
Read the operating instructions carefully before attempting to operate the
BOILERMASTER™
Use eye protection at all times when operating the BOILERMASTER™.
PREPARING THE BOILERMASTER™
Select the recommended jaw blocks for the pipe size to be machined.
Gently slide the mandrel assembly into the BOILERMASTER™ until it comes to a
stop against the torque acceptance key.
Rotate the mandrel assembly as required to engage the torque acceptance key of
the BOILERMASTER™ with the slot in the mandrel shaft.
Since the mandrel shaft will contact the torque acceptance key before the
feed nut engages the mandrel shaft threads, caution should be taken not to
force (or allow) the machine to impact the lead threads of the feed nut with
the lead threads of the mandrel.
Rotate the feed handle clockwise to engage the feed nut with the thread on the
mandrel shaft.