Venstar T1075 - Manual (Page 20)

Advanced Setup
Select fan coil system
type:
2 = 2-pipe fan coil
4 = 4-pipe fan coil
4
2
4
5
Setup
Press
MODE
Page 19
Select Display operation:
1 = Single Setpoint
2 = Dual Setpoint
See Page 33
setpoint will always be displayed. To display the
room temperature, press and hold the MODE
button for two seconds. The degree icon will
blink when the large number is displaying room
temperature and will remain solid when dis-
playing the heating or cooling setpoint.
4
Setup
2
Note: When Single Setpoint is
selected, the heating or cooling
Press
MODE
Continued
Step #6 only appears if step #5 = 2.
2 PIPE SYSTEM OPERATION
1= Heat only system
2= Cool only system
3= Heat/Cool Auto
changeover
4= Heat/Cool Aux Electric
heat, Lockout Electric Heat
when Hot Water is available
5= Heat/Cool total electric
heat, no Hot Water, only
Electric Heat.
Press
MODE
I
6
Setup