Venstar T2300FS - Manual (Page 26)

About Advanced Features & Operation
KEYPAD LOCKOUT - To prevent unauthorized use of the thermostat, the
front panel buttons may be disabled. To disable, or ‘lock’ the keypad,
press and hold the MODE button. While holding the MODE button, press
the UP and DOWN buttons together. The LOCKED icon will appear on
the display, then release the buttons.
Press all three
buttons in the order
outlined above for
keypad lockout
MODE
To unlock the keypad, press and hold the MODE button. While holding
the MODE button, press the UP and DOWN buttons together. The
LOCKED icon will disappear from the display, then release the buttons.
72
76
68
occupied
Program
Fan On
On
Pm
C OOL
H EAT
Locked
Mo
1
I2:00
SOFT START - This feature is utilized on job sites where multiple
thermostats and installed controlled by a Central Time Clock via the
thermostat Dry Contact terminals. Assigning a unique Soft Start number
to each thermostat will stagger the turn on times, even though the Dry
Contact closes for all the thermostats connected at the same time. Each
Soft Start number represents a multiple of 30 seconds from the Dry
Contact closure.
For example, #1 = turn on 30 seconds after Dry Contact closure,
#2 = turn on 60 seconds after closure, #3 = turn on 90 seconds
after closure, and so on. See step 14 on page 17 to configure the
thermostat for Soft Start.
Page 25