Factory default, Page 20, Owner's manual – Venstar T1045 User Manual
Page 20
Page 20
88
88
SET
MTuWThF
SaSu
AM
PM
MorningEvening
Day
Night
AUX
HEAT
COOL
I2:00
:
FILTER
88
88
SET
MTuWThF
SaSu
AM
PM
MorningEvening
Day
Night
AUX
HEAT
COOL
I2:00
:
FILTER
Factory Default
CAUTION
When the Cycles Per Hour is
flashing, press and hold the NEXT
button until this screen appears.
Enter advanced setup by sliding the Program Switch to
SET. When the clock is flashing, press the NEXT button for
5 seconds. Do not release the button until this screen
appears.
Press and hold the
NEXT button again
until this screen appears.
After restoring factory
defaults, the thermo-
stat screen will display
all icons.
If, for any reason, you desire to return all the stored settings
back to the factory default settings, follow the instructions below.
WARNING: This will reset all Time Period and Advanced Programming to
the default settings. Any information entered prior to this reset may be
permanently lost.
OWNER'S MANUAL
T1045
Page 20
Slide the Program Switch to OFF or RUN
to return to normal operation.
Press NEXT
to advance