Verilink PRISM 4051 (34-00253.2) Product Manual - Manual (Page 3)

7 On the side of the 1051 chassis is a label that contains, among other information, FCC registra-
tion number for this equipment. If requested, this information must be provided to the telephone
company.
Canadian Emissions Requirements
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of Communi-
cations.
On 48-VDC units only, end users should use existing 48-VDC battery sources or
a CSA-certified power supply.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applica-
bles aux appareils numériques (de la class A) prescrites dans le Règlement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.
Notice: The Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications network protective, operational, and safety require-
ments. The Industry Canada does not guarantee the equipment will operate to the user’s
satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. In some cases, the company’s inside wiring associated with a
single line individual service may be extended by means of a certified connector assembly (tele-
phone extension cord). The customer should be aware that compliance with the above conditions
may not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this equipment, or equip-
ment malfunctions, may give the telecommunications company cause to request the user to discon-
nect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines, and internal metallic water pipe system, if present, are connected together.
This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
Warranty
Verilink's product warranty covers repair or replacement of all equipment under normal use for a
five-year period from date of shipment. Replacement products may be new or reconditioned. Any
replaced or repaired product or part has a ninety (90) day warranty or the remainder of the initial
warranty period, whichever is longer. Our in-house Repair Center services on a standard 10-work-
day-turnaround basis.
Customer Service
Verilink offers the following services:
• System Engineers at regional sales offices for network design and planning assistance
(800) 837-4546
• Technical Assistance Center for free 24
×
7 telephone support during installation, maintenance, and
troubleshooting at (800) 285-2755 and [email protected]
• Return Materials Authorization (RMA) (800) 926-0085, ext. 2282
• Maintenance contracts and leasing plans (800) 837-4546, ext. 206
• Technical Training on network concepts and Verilink products at (800) 837-4546,
ext. 346 and [email protected]
✍